features ?plastic package has underwriters laboratory flammability classification 94v-0 ?designed for the hood applications ?available in uni-directional only ?exclusive patented par oxide passivated chip construction ?400w peak pulse power capability on 10/1000 s waveform, repetition rate (duty cycle): 1.0% ?excellent clamping capability ?low incremental surge resistance ?very fast response time ?for devices with v (br) 10v, i d are typically less than 1.0 a ?high temperature soldering guaranteed: 300?/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension mechanical data case: molded plastic over passivated junction terminals: axial leads, solderable per mil-std-750, method 2026 polarity: color band denotes positive end (cathode) mounting position: any weight: 0.0064oz., 0.181g packaging codes/options: 1/5k per bulk box, 50k/box 3/3k per ammo box (26mm tape), 60k/box 4/5.5k per 13?reel (52mm tape), 22k/box 23/3k per ammo box (52mm tape), 27k/box 50/2.5k per radial-tape ammo box, 10k/box case style tmpg-06 maximum ratings and thermal characteristics (t a = 25? unless otherwise noted) parameter symbol limit unit peak power dissipation with a 10/1000 s waveform p ppm minimum 400 w (note 1, fig. 1) peak pulse power current with a 10/1000 s waveform i ppm see next table a (note 1,2 fig. 3) steady state power dissipation at t l = 75? p m(av) 1.0 w lead lengths 0.25?(6.33mm) (note 2) peak forward surge current, 8.3ms single half sine-wave superimposed on rated load i fsm 40 a (jedec method) (note 3) maximum instantaneous forward voltage at 25a (note 3) v f 3.5 v operating junction and storage temperature range t j , t stg 65 to +185 ? notes: (1) non-repetitive current pulse, per fig. 3 and derated above t a = 25? per fig. 2 (2) mounted on copper pad area of 1.6 x 1.6?(40 x 40mm) (3) measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum 7/6/00 1.0 (25.4) min. 1.0 (25.4) min. 0.125 (3.18) 0.115 (2.92) 0.090 (2.29) 0.025 (0.635) 0.025 (0.559) 0.100 (2.54) patented* available in uni-directional only dimensions in inches and (millimeters) * patent # s 4,980,315 5,166,769 5,278,094 tmpg06-6.8 thru tmpg06-43a automotive transient voltage suppressor breakdown voltage 6.8 to 43v peak pulse power 400w
electrical characteristics (t a = 25? unless otherwise noted) maximum maximum breakdown voltage maximum reverse peak pulse maximum temp. v (br) test stand-off reverse leakage current clamping coefficient volts (note 1) current voltage leakage at v wm i ppm voltage of at i t v wm at v wm t j =150 c (note 2) at l ppm v (br) device type min max (ma) (volts) i d ( a) i d ( a) (amps) v c (volts) (% / c) tmpg06-6.8 6.12 7.48 10.0 5.50 300 1000 27.8 10.8 0.057 tmpg06-6.8a 6.45 7.14 10.0 5.80 300 1000 28.6 10.5 0.057 tmpg06-7.5 6.75 8.25 10.0 6.05 150 500 25.6 11.7 0.060 tmpg06-7.5a 7.13 7.88 10.0 6.40 150 500 26.5 11.3 0.061 tmpg06-8.2 7.38 9.02 10.0 6.63 50.0 200 24.0 12.5 0.065 tmpg06-8.2a 7.79 8.61 10.0 7.02 50.0 200 24.8 12.1 0.065 tmpg06-9.1 8.19 10.0 1.0 7.37 10.0 50.0 21.7 13.8 0.068 tmpg06-9.1a 8.65 9.55 1.0 7.78 10.0 50.0 22.4 13.4 0.068 tmpg06-10 9.00 11.0 1.0 8.10 5.0 20.0 26.7 15.0 0.073 tmpg06-10a 9.50 10.5 1.0 8.55 5.0 20.0 27.6 14.5 0.073 tmpg06-11 9.90 12.1 1.0 8.92 2.0 10.0 24.7 16.2 0.075 tmpg06-11a 10.5 11.6 1.0 9.40 2.0 10.0 25.6 15.6 0.075 tmpg06-12 10.8 13.2 1.0 9.72 1.0 5.0 23.1 17.3 0.076 tmpg06-12a 11.4 12.6 1.0 10.2 1.0 5.0 24.0 16.7 0.078 tmpg06-13 11.7 14.3 1.0 10.5 1.0 5.0 21.1 19.0 0.081 tmpg06-13a 12.4 13.7 1.0 11.1 1.0 5.0 22.0 18.2 0.081 tmpg06-15 13.5 16.3 1.0 12.1 1.0 5.0 18.2 22.0 0.084 tmpg06-15a 14.3 15.8 1.0 12.8 1.0 5.0 18.9 21.2 0.084 tmpg06-16 14.4 17.6 1.0 12.9 1.0 5.0 17.0 23.5 0.086 tmpg06-16a 15.2 16.8 1.0 13.6 1.0 5.0 17.8 22.5 0.086 tmpg06-18 16.2 19.8 1.0 14.5 1.0 5.0 15.1 26.5 0.088 tmpg06-18a 17.1 18.9 1.0 15.3 1.0 5.0 15.9 25.5 0.088 tmpg06-20 18.0 22.0 1.0 16.2 1.0 5.0 13.7 29.1 0.090 tmpg06-20a 19.0 21.0 1.0 17.0 1.0 5.0 14.4 27.7 0.090 tmpg06-22 19.8 24.2 1.0 17.8 1.0 5.0 12.5 31.9 0.092 tmpg06-22a 20.9 23.1 1.0 18.8 1.0 5.0 13.1 30.6 0.092 tmpg06-24 21.6 26.4 1.0 19.4 1.0 5.0 11.5 34.2 0.094 tmpg06-24a 22.8 25.2 1.0 20.5 1.0 5.0 12.0 33.2 0.094 tmpg06-27 24.3 29.7 1.0 21.8 1.0 5.0 10.2 39.1 0.096 tmpg06-27a 25.7 28.4 1.0 23.1 1.0 5.0 10.7 37.5 0.096 tmpg06-30 27.0 33.0 1.0 24.3 1.0 5.0 9.2 43.5 0.097 tmpg06-30a 28.5 31.5 1.0 25.6 1.0 5.0 9.7 41.4 0.097 tmpg06-33 29.7 36.3 1.0 26.8 1.0 5.0 8.4 47.7 0.098 tmpg06-33a 31.4 34.7 1.0 28.2 1.0 5.0 8.8 45.7 0.098 tmpg06-36 32.4 39.6 1.0 29.1 1.0 5.0 7.7 52.0 0.099 tmpg06-36a 34.2 37.8 1.0 30.8 1.0 5.0 8.0 49.9 0.099 tmpg06-39 35.1 42.9 1.0 31.6 1.0 5.0 7.1 56.4 0.100 tmpg06-39a 37.1 41.0 1.0 33.3 1.0 5.0 7.4 53.9 0.100 tmpg06-43 38.7 47.3 1.0 34.8 1.0 5.0 6.5 61.9 0.101 tmpg06-43a 40.9 45.2 1.0 36.8 1.0 5.0 6.7 59.3 0.101 notes: (1) v (br) measured after i t applied for 300 s, i t = square wave pulse or equivalent (2) surge current waveform per fig. 3 and derated per fig. 2 (3) all terms and symbols are consistent with ansi/ieee c62.35 tmpg06-6.8 thru tmpg06-43a automotive transient voltage suppressor
0 1.0 2.0 3.0 4.0 0 100 150 50 1.0 10 100 200 10 100 1,000 10,000 0 25 50 75 100 125 150 175 200 0 0.25 0.50 0.75 1.00 1 10 100 10 100 0.1 s 1.0 s 10 s 100 s 1.0 m s 10 m s 0.1 1.0 10 100 0 50 100 150 200 0 25 50 75 100 25 75 125 175 fig. 1 - peak pulse power rating curve fig. 2 - pulse derating curve p ppm , peak pulse power, kw td, pulse width, sec. t a , ambient temperature, c fig. 4 - typical junction capacitance fig. 3 - pulse waveform t, time, ms fig. 5 - steady state power derating curve v (br) , breakdown voltage, volts fig. 6 - maximum non-repetitive forward surge current t l, lead temperature, c number of cycles at 60 h z i ppm peak pulse current, % p m(av) steady state power dissipation, watts peak pulse power (p pp ) or current (i pp ) derating in percentage, % c j , junction capacitance, pf i fsm, peak forward surge current, amperes non-repetitive pulse waveform shown in fig. 3 t a =25 c tmpg06-6.8 - tmpg06-9.1a tmpg06-10 - tmpg06-43a pulse width (td) is defined as the point where the peak current decays to 50% of ipp tr=10 sec. peak value i ppm half value - i pp 2 10/1000 sec. waveform as defined by r.e.a. td t j =25 c f=1 mhz vsig=50mvp-p measured at zero bias measured at stand-off voltage, v wm 60h z resistive or inductive load 1.6 x 1.6 x .040" (40 x 40 x 1mm) copper heat sinks t l =75 c 8.3ms single half sine-wave (jedec method) = 0.375 (9.5mm) lead length l ratings and characteristic curves t a =25 o c unless otherwise noted. tmpg06-6.8 thru tmpg06-43a automotive transient voltage suppressor
|